Automatic PET Strap Winding Machine with Palletizing & Cardboard Layering
PET STRAP Automatic Winder/Wrapper - MAX 80KG per coil
Friendly used with automatic palletizing system
Automated PET Strap Winder CQA800F
CQA800F is suitable for one out of six, one out of eight PET strap production lines with robotic arm use.
The strap winder is used for winding straps in parallel directly from the extruder.
The systems work independently once the material has been applied manually. They can be integrated into
fully automated overall production plants. They wind PET straps with width of 9~32mm depending on configuration.
Once a winding package has reached the desired circumference, it is wrapped with film by the integrated
winder and tipped by the integrated transport system from the winder down to the roller conveyor below.
A new winding tube is fed from the magazine at the same time and the next package is wound fully automatically.
The machines were developed for continuous operation. The compact design permits use even in confined spaces.
Key Features and Advantages
- Fully automatic PET strap winder for straps from 9 to 32 mm, with an outer package diameter of 820 mm
- Conveyor system for automatic package transport
- Film wrapping device for automatic package wrapping
- Central input terminal with recipe management
- Fully automatic winding can be achieved with or without paper core
Technical Specifications
| Specification |
CQA800F |
| Winding speed |
50 - 250 m/min |
| Maximum pick up speed |
350 m/min |
| Maximum mandrel rotation speed |
500 m/min |
| Strap width |
9~32mm |
| Traverse length |
50~200mm |
| Mandrel diameter |
406mm or customized |
| Maximum package diameter |
820 mm |
Standard Equipment
- Dancer control for controlling constant strap tension and winding speed, Dual servo motor
- Precise, electronically controlled 2 or 3 point laying with minimal strap bend
- Pneumatic lamella spreading mandrels for fast bobbin change
- Sleeve magazine
- Bobbin deposit
- Automatic film dispenser
- Two measurement modes: weight and meter
PET Strap Automatic Palletizing System
Palletizing Program Specifications
Program A: Strap OD 600MM, height 150MM, weight 20KG, 1 layer of 4, separated by cardboard, up to 12 layers.
Program B: Strap O.D. 800MM, height 190MM, weight 75KG, 1 layer of 2, cardboard separated, up to 7 layers.
System Components
- Robot arm model: JZJ160A-270
- Speed: 40 seconds per roll
- One automatic palletizing system can match up to 2 sets of one out 8 PET strap production lines
- Cardboard platform dimensions: length 1240mm * width 1240mm * height 1500mm
- Positioning conveyor belt size: length 3220mm * width 1170mm * height 680mm
- Robot arm base: length 700mm * width 700mm * height 1000mm
After the finished product arrives at the positioning position of the conveyor belt, the robotic arm grabs
the finished product onto the pallet until one layer is full. The robotic arm then picks up the cardboard
finished product pallet from the cardboard pallet and repeats the action until the finished product pallet is stacked.
